Aruba Networks Access Point Aruba AP 60/61 Guía de instalación Pagina 14

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 68
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 13
Provisioning Access Points
Chapter 2
10 Aruba AP 60/61 0500160
Installation Guide December 2005
FIGURE 2-1 Provisioning Tab
2. Configure the APs Subnet and Netmask.
This is the subnet from which the AP gets an IP during provisioning. (This is
not the IP address the AP will use when deployed. The provisioning subnet
should be not be the same as an existing subnet on Mobility Controller.)
3. Select the Port or Port range for provisioning.
To set the Port Range, select the first and the last ports of your range. All the
ports in between are automatically selected. (Ports have to be sequentially
assigned.)
4. Enter the required information and click
Enable.The Port Range screen
displays.
Vista de pagina 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 67 68

Comentarios a estos manuales

Sin comentarios