Aruba Networks Access Point Aruba AP 60/61 Guía de instalación Pagina 19

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 68
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 18
Aruba AP 60/61 15
Installation Guide
Provisioning Access Points
Chapter 2
The LAN connection is optional unless POE is being used to power the AP.
For convenience, the adapter kit includes an FE coupler to connect RJ-45
cable ends together.
4. Connect power to the Aruba AP 60/61.
The Aruba AP 60/61 can receive electrical power using the following options:
z POE–If connecting the Aruba AP 60/61 to a device that supplies IEEE 802.3af
compliant POE, no additional power connection is necessary.
z Power Outlet
N
OTE: When the Aruba AP 60/61 is installed in an air-handling space, as
described in NEC (2002) Article 300.22(C), POE must be used instead
of a power outlet.
If local regulations and practices permit, connect the optional AC power
adapter (not included) to the DC power socket on the rear panel of the Aruba
AP 60/61 and plug it into an appropriate power outlet.
N
OTE: The indicator LEDs on the Aruba AP 60/61 will remain dark during this
procedure.
5. Set your local terminal to use the following communications:
Establish console communication.
Press <Enter> a few times to establish communication between the Aruba AP
60/61 and terminal.
6. From the Aruba AP 60/61 console, access the apboot prompt.
CAUTION: Be sure to comply with electrical grounding standards
during all phases of installation and operation of the AP.
Do not allow the Aruba AP 60/61 or optional power
adapter (if used) to be connected to or make contact with
metal or power outlets on a different electrical ground
than the device to which it is connected. Also, never
connect the AP to external storm grounding sources.
CAUTION: To prevent personal injury or damage to equipment,
use only the AC power adapter certified for this device
in the country where it is used.
TABLE 2-1 Console Terminal Settings
Baud Rate Data Bits Parity Stop Bits Flow Control
9600 8 None 1 None
Vista de pagina 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 67 68

Comentarios a estos manuales

Sin comentarios