
Spectralink VIEW Certified Configuration Guide: Aruba Networks
721-1002-000_AB.docx
March 2015 42
Creating a VoIP CAC profile
In the CLI commands below, use the bandwidth from the table below that corresponds to the
codec the phones on the network will be using. As described in Spectralink 84-Series Wireless
Telephone Administration Guide, the 84-Series handsets support the codecs shown in the table
below. If the configuration is not changed from the default described in the reference, the codec
used will be the one shown first in the table that is supported by the other side of the call. The
84-Series handsets can be configured to add the optional codecs shown in the table. This
feature is used when communicating with desksets with high definition audio.
The 8020/8030 phones support G.711μ-law, G.711a-law and G.729 codecs but always ask for
the largest bandwidth allocation, so only one entry is needed per radio band.
Choose the bandwidth from the table below that is the smallest number needed to support the
type of phones or codecs expected so that the number of calls will be limited to what the AP can
support.
Admin Tip: 87-Series, WMM-AC Incompatible
Spectralink 87-Series handsets have not yet implemented TSPEC control. They
will not operate properly in a network with WMM-AC turned on.
8020/8030 handsets
84-Series handsets Default Codecs (in priority order)
Comentarios a estos manuales