
Spectralink VIEW Certified Configuration Guide: Aruba Networks
721-1002-000_AB.docx
March 2015 59
1 Note: this command disables deep packet inspection for SIP and must be used from the
cli for proper WMM Access Control (TSPEC) operation. No GUI equivalent is currently
available:
(Aruba651)# configure terminal
(Aruba651)# voice alg-based-cac disable
2 Click AP Configuration.
3 Click QoS.
4 On the right pane, select NEW and enter a Cac profile name (Ex., 8400_g).
5 Click Apply.
6 Click the newly created profile name
a Click VoIP Call Admission Control Profile.
b Check VoIP Call Admission Control, Enable only WMM-AC CAC, and VoIP
Bandwidth based CAC.
c Enter the bandwidth from the table in the VoIP Bandwidth Capacity (kbps) as
described above.
d Uncheck VOIP TSPEC Enforcement, VoIP Send SIP 100 Trying, and VoIP
Disconnect Extra Call.
e Select none from the VoIP Drop SIP… dropdown lists.
f Click Apply and Save Configuration.
Comentarios a estos manuales